Nissan Sentra B18 (2020-2025) Service Manual: Draining
CAUTION:
Do not spill clutch fluid onto painted surfaces. If fluid spills, wipe up immediately and wash the affected area with water.
Connect a
transparent vinyl hose to air bleeder of bleeding connector
(1).
Press the
lock pin (1) into the bleeding connector (2), and maintain the
position.
Slide
bleeding connector (1) in the direction of the arrow (
) as shown. 
|
(2) |
: Clutch housing |
|
Dimension (A) |
: 10 mm (0.39 in) |
Depress clutch pedal to gradually discharge clutch fluid.
CAUTION:
Clutch tube is under hydraulic pressure; do not allow the clutch tube to disconnect from the bleeding connector.
Inspection
Inspection
FLUID LEAKAGE
Check clutch line for cracks, deterioration or
other damage. Replace any damaged parts.
Check for fluid leakage by fully depressing
...
Refilling
Refilling
CAUTION:
Do not spill clutch fluid onto painted surfaces.
If fluid spills, wipe up immediately and wash the affected area
with water.
Check that
there is no ...
Other materials:
Removal and Installation
Removal and Installation
REMOVAL
CAUTION:
When replacing the sonar control unit, perform
"ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT". Refer to Work Procedure.
Partially
remove the trunk side finisher (LH). Refer to Exploded View.
Remove bolt
(A) from ...
Sheet Metal Work
Sheet Metal Work Tools
Sheet Metal Work Tools
Sheet Metal Work Tools
This section explains various tools used in body
repair work.
Hammers
Hammers
A hammer is used to correct dents, projections or
other deformations. Various shapes have been designed according to
their pur ...
Symptom diagnosis
Squeak and rattle trouble diagnoses
Work Flow
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist
when the noise occurs. Use the Diagnostic
Worksheet during the interview to document the facts and conditions when the
noise occurs and any
custom ...
