Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
CAUTION:
When replacing the sonar control unit, perform "ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT". Refer to Work Procedure.
Partially remove the trunk side finisher (LH). Refer to Exploded View.
Remove bolt
(A) from sonar control unit (1). 
Disconnect the harness connector and remove sonar control unit.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When replacing the sonar control unit, perform "ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT". Refer to Work Procedure.
Other materials:
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
Regulatory information
FCC Regulatory Information
CAUTION: To maintain full compliance with FCC RF exposure guidelines, only
the supplied antenna must be used. The use of unauthorized antennas, modifications,
or attachments could damage the transmitter and may result in non-compliance
with FCC regulations app ...
Eps branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the eps control unit for damage,
bend and loose connection (unit
side and connector side).
Is the inspection result norm ...
