CAUTION:
Do not spill clutch fluid onto painted surfaces. If fluid spills, wipe up immediately and wash the affected area with water.
Check that there is no foreign material in reservoir tank, and then fill with new clutch fluid.
CAUTION:
Do not reuse drained clutch fluid.
Connect a
transparent vinyl hose to air bleeder of bleeding connector
(1).
Press the
lock pin (1) into the bleeding connector (2), and maintain the
position.
Slide
bleeding connector (1) for the specified distance (A) in the
direction of the arrow (
) as shown.
|
(2) |
: Clutch housing |
|
Dimension (A ) |
: 10 mm (0.39 in) |
Slowly depress clutch pedal to the full stroke position, and then release the pedal.
CAUTION:
Clutch tube is under hydraulic pressure; do not allow the clutch tube to disconnect from the clutch housing.
Repeat step 5 at intervals of 2 or 3 seconds until new clutch fluid is discharged.
CAUTION:
Monitor clutch fluid level in reservoir tank so as not to empty the tank.
Return clutch tube and lock pin in their original positions while clutch pedal is depressed.
Perform the air bleeding. Refer to Air Bleeding.
Draining
Air BleedingExploded View
Exploded View
1.
LATCH bracket (LH/RH)
A.
Refer to Removal and Installation.
...
Removal and Installation
Removal and Installation
MANUAL MIRROR
Removal
Insert a
suitable tool (A) under the inside mirror (1).
Slide the
inside mirror upward while pushing down on the pawl.
CAUTION:
Do not reuse the inside mirror disassembled from
inside mirror base. ...
P2614 Intake Camshaft Position Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...