Nissan Sentra B18 (2020-2025) Service Manual: Door Striker
Removal and Installation
REMOVAL
Remove bolts.
Remove front door striker.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Do not reuse front door striker bolts.
-
After installation, check front door open/close operation. If necessary, adjust the front door striker. Refer to Adjustment.
Adjustment
Loosen door striker bolts.
Adjust door
striker so that it becomes parallel with front door lock insertion
direction.
Tighten door striker bolts to specification. Refer to Exploded View.
Door Assembly
Removal and Installation
Removal and Installation
CAUTION:
Use two people when removing or installing the
front door due to its heavy weight.
...
Door Hinge
Removal and Installation
Removal and Installation
REMOVAL
Remove
front door assembly. Refer to Removal and Installation.
Remove
front fender. Refer to Removal and Installation.
...
Other materials:
System Setting
Target Evaporator Temp Upper Limit
Target Evaporator
Temp Upper Limit
DESCRIPTION
Set the target evaporator temperature upper limit.
HOW TO SET
CONSULT
Select “TARGET EVAPORATOR TEMP UPPER LIMIT SETTING”
in “Work support” mode of “HVAC”.
...
Illumination Control System
System Description
System Description
SYSTEM DIAGRAM
OUTLINE
Each illumination lamp is controlled by each function
of BCM and combination meter.
Control by BCM
Parking, license plate, side marker and tail lamp
control function
Combination switc ...
Replacement operations
Description
This section is prepared for technicians who have attained a high level of
skill and experience in repairing collision-
damaged vehicles and also use modern service tools and equipment. Persons
unfamiliar with body
repair techniques should not attempt to repair collision-damaged v ...
