Nissan Sentra B18 (2020-2025) Service Manual: Door Hinge
Removal and Installation
REMOVAL
Remove front door assembly. Refer to Removal and Installation.
Remove front fender. Refer to Removal and Installation.
Remove front door hinge bolts (body side) and front door hinge.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Apply anticorrosive agent to the hinge mating surface.
-
After installation, check front door open/close and lock/unlock operation.
-
Check door hinge rotating point for poor lubrication. If necessary, apply a suitable multi-purpose grease.
-
After installation, perform the front door adjustment procedure. Refer to Adjustment.
Door Striker
Removal and Installation
Removal and Installation
REMOVAL
Remove
bolts.
Remove
front door striker.
INSTALLATION
Installation is in the reverse order of
removal.
CAUTIO ...
Door Check Link
Removal and Installation
Removal and Installation
REMOVAL
Fully close
the front door window glass.
Remove
front door speaker. Refer to Removal and Installation (DISPLAY AUDIO WITH
...
Other materials:
Pre-Inspection for Diagnosis
Work Procedure
Work Procedure
CHECK CAMERA LENS AND WINDSHIELD
Are camera lens and windshield contaminated with
foreign materials?
YES (When the camera lens is
contaminated with foreign materials.) >>
Replace front camera unit (Refer to R ...
P0014 Evt Control
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Dtc Confirmation Procedure
DTC Confirmation Procedure
DTC CONFIRMATION
CONSULT
Ignition switch ON and wait for 2 seconds or
more.
Select “Self Diagnostic Result” mode
...
