Nissan Sentra B18 (2020-2025) Service Manual: Door Motor Starting Position Reset
Description
-
Reset signal is transmitted from A/C auto amp. to air mix door motor and mode door motor. Starting position reset can be performed.
Note:
During reset, DEF switch indicator blinks.
-
When air mix door motor or mode door motor is removed and installed, always perform door motor starting position reset.
Work Procedure
-
PERFORM DOOR MOTOR STARTING POSITION RESET
-
CONSULT-
Ignition switch ON.
-
Select “Door Motor Starting Position Reset” in “Active Test” mode of “HVAC”.
-
Select “Start” and wait a few seconds.
-
Make sure the “COMPLETED” is displayed on CONSULT screen.
-
Inspection End.
-
System Setting
Temperature Setting Trimmer
Temperature
Setting Trimmer
Description
If the temperature felt by the customer is different
than the airflow temperature controlled by the temperature setti ...
Other materials:
Exploded View
Exploded View
With Drum Brake
1.
Rear suspension member
2.
Washer
3.
...
Optical Sensor
Exploded View
Exploded View
1.
Optical sensor
2.
Mask
3.
Instrument ...
Inspection
Inspection
INSPECTION AFTER DISASSEMBLY
Check the following items and replace the parts
if necessary.
Strut
Check the strut for oil leaks, deformation,
cracks, or damage.
Check the piston rod for damage, uneven wear, or
distortion.
St ...
