Exploded View
|
1. |
Door mirror assembly |
2. |
Door mirror base cover |
3. |
Side camera |
|
4. |
Door mirror turn signal lamp |
5. |
Door mirror housing |
6. |
Glass mirror |
|
7. |
Door mirror actuator |
8. |
Door mirror corner finisher |
9. |
Door mirror cover |
Removal and Installation
Removal
Remove the side camera. Refer to Removal and Installation.
Remove
screw (A) from the door mirror turn signal lamp (1). 
Release the
pawls on door mirror turn signal lamp (1).
|
|
: Pawl |
Disconnect the harness connector and remove the door mirror turn signal lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
The door mirror turn signal lamp bulb is LED and is serviced as an assembly to the door mirror turn signal lamp. Refer to Removal and Installation.
Front Combination Lamp
High-Mounted Stop LampInside mirror
Exploded view
Manual mirror
Windshield glass
Inside mirror base
Inside mirror assembly
Auto anti-dazzle mirror
Windshield glass
Inside mirror base
Harness connector
Mirror screw
Inside mirror assembly
Inside mirror cover
Removal and installation
Manual mirror
...
Repairing Procedures and Precautions
Fundamentals of Body Repair
Fundamentals of Body Repair
Fundamentals of Body Repair
There are many kinds of damage caused by
collisions.Therefore, the appropriate repair method for the damage
should be selected. This section outlines repair methods of major
damage and how to use ...
Rear Rh
Component Function Check
Component Function
Check
CHECK FUNCTION
CONSULT
Select "DOOR LOCK" in "Active Test" mode of "BCM(DOOR
LOCK)".
Select “ALL LOCK” o ...