Nissan Sentra B18 (2020-2025) Service Manual: Door Check Link
Removal and Installation
REMOVAL
Remove rear door finisher. Refer to Removal and Installation.
Partially remove vapor barrier (front).
Remove door check link bolt from (body side).
Remove door check link bolts from (door side).
Remove door check link through hole in door panel.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
After installation, check rear door open/close and lock/unlock operation.
-
Check rear door check link rotating point for poor lubrication. If necessary, apply a suitable multi-purpose grease.
Door Hinge
Removal and Installation
Removal and Installation
REMOVAL
Remove rear
door assembly. Refer to Removal and Installation.
Remove
center pillar lower finisher (rear door lower hinge o ...
Trunk Lid
...
Other materials:
B20d4-11 Tail Lamp Lh Pwr Sply Circ
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis content)
DTC detection condition
...
Break-in schedule
CAUTION
During the first 1,200 miles (2,000 km),
follow these recommendations to obtain
maximum engine performance and ensure
the future reliability and economy of your
new vehicle. Failure to follow these recommendations
may result in shortened
engine life and reduced engine
performance.
A ...
Hood Switch
Component Function Check
Component Function Check
CHECK FUNCTION
CONSULT
Select “Hood switch” and “HOOD
SW (CAN)” in “Data Monitor” mode of “IPDM
E/R”.
...
