Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Diagnosis Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Driver Information & Multimedia / Sonar System :: Dtc/circuit Diagnosis / U1000 Can Comm Circuit / Diagnosis Procedure

Diagnosis Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE AGAIN

    1. CONSULT

      1. Ignition switch ON.

      2. Erase DTC.

      3. Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.

    Is DTC U1000–00 detected?

    YES >>

    Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.

    NO >>

    Inspection End.

Dtc Confirmation Procedure
DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON. ...

U1010 Control Unit(can)
...

Other materials:

Side Radar Left (side Radar Lh)
C1e00-44 Control Unit Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecti ...

Front fog lamp
Removal and Installation FOG LAMP Removal Position the fender protector aside. Refer to EXT-28, "FENDER PROTECTOR : Removal and Installation - Front Fender Protector". Disconnect the harness connector from the front fog lamp. Remove the screws and the front fog lamp. Inst ...

Main power window and door lock/ unlock switch
Removal and Installation REMOVAL Release the pawls using a suitable tool and lift the main power window and door lock/unlock switch and finisher as an assembly and remove. Disconnect the harness connector from the main power window and door lock/unlock switch. Release the four pawls ...

© 2014-2026 Copyright www.nisentra.com