Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Driver Information & Multimedia / Sonar System :: Dtc/circuit Diagnosis / U215b Can Comm Err (ipdm E/r) / Confirmation Procedure

Confirmation Procedure

DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Ignition switch OFF and wait at least 30 seconds.
  3. Ignition switch ON and wait at least 2 seconds or more.
  4. Select “Self Diagnostic Result” mode of “SONAR”.
Is DTC U215B–87 detected?
YES>>
Refer to DTC Diagnosis Procedure.
NO>>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure PERFORM DTC CONFIRMATION PROCEDURE AGAIN CONSULT Ignition switch ON. ...

Other materials:

Warning signals
To help prevent the vehicle from moving unexpectedly by erroneous operation of the Intelligent Key or to help prevent the vehicle from being stolen, a chime or buzzer sounds from inside and outside the vehicle and a warning light comes on in the instrument panel. When a chime or beep sounds ...

Removal and Installation
Removal and Installation REMOVAL Remove front bumper fascia. Refer to Removal and Installation. Remove ambient sensor. Refer to Removal and Installation. Disconnect harness connector (A). Remove clips (A). Remove bolts (A) and active grille shutter. INSTAL ...

Trip computer
When the ignition switch is placed in the ON position, the modes of the trip computer can be selected by pressing the button on the steering wheel. The following modes can be selected: Trip A Trip B ECO Pedal Indicator Instant fuel economy Average fuel economy Average speed Dis ...