Description

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing around view monitor control unit.

Configuration has three functions as follows

CAUTION:

• When replacing around view monitor control unit, you must perform “WRITE CONFIGURATION” with CONSULT.

• Never perform “WRITE CONFIGURATION” except for new around view monitor control unit.

Work Procedure

Work Procedure

1. WRITING MODE SELECTION

   1. CONSULT

      Select “CONFIGURATION” mode of "AVM".

   When writing saved data>>

   GO TO 2.

   When writing manually>>

   GO TO 3.

2. PERFORM “WRITE CONFIGURATION - Config file”

   1. CONSULT

      Perform “WRITE CONFIGURATION - Config file”.

   >>

   Work End.

3. PERFORM “MANUAL CONFIGURATION”

   1. CONSULT

      Select “MANUAL CONFIGURATION” to write Nissan Sentra vehicle specifications into the around view monitor control unit.

      CAUTION:

      • Thoroughly read and understand the Nissan Sentra vehicle specification. Incorrect settings may result in abnormal control of ECU.

      • Make sure to select “NEXT” even if the default settings displayed on the CONSULT are the desired settings. If “NEXT” is not selected, the configuration process will be incomplete.

      Note:

      If manual configuration items are not displayed, touch “NEXT”.

   >>

   GO TO 4.

4. OPERATION CHECK

   1. Confirm that each function controlled by around view monitor control unit operates normally.

   >>

   Work End.