Nissan Sentra B18 (2020-2025) Service Manual: Predictive Course Line Center Position Adjustment
Description
Adjust the center position of the predictive course line of the rear view monitor if it is shifted.
Work Procedure
-
DRIVING
-
Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of 30 km/h (18.6 MPH) or more.
End.
-
Configuration (around View Monitor Control Unit)
Description
Description
Vehicle specification needs to be written with
CONSULT because it is not written after replacing around view
monitor control unit.
Configuration has three functi ...
Calibrating Camera Image (intelligent Around View Monitor)
Description
Description
Calibration must be performed after
removing/replacing the cameras, removing parts (e.g. front grille,
door mirror, and others) mounted on the ...
Other materials:
Symptom diagnosis
Engine does not start when intelligent key is inside of vehicle
Description
Engine does not start when push-button ignition switch is pressed while
carrying intelligent key.
Note:
Check that vehicle is under the condition shown in “conditions of
vehicle” before starting diagnos ...
Symptom Description
Symptom Description
The low tire pressure warning lamp does not turn
ON when the ignition switch is ON.
Note:
The low tire pressure warning lamp turns ON for
approximately 1 second and then turns OFF when the ignition switch
is ON. This is to check that no abnormal condition is pr ...
Additional Service When Removing Battery Negative Terminal
Special Repair Requirement
Special Repair
Requirement
Required Procedure
After Battery Disconnection
System
Item
Reference
...
