Nissan Sentra B18 (2020-2025) Service Manual: Component Function Check
-
CHECK FRONT WIPER AUTO STOP SIGNAL
-
CONSULT-
Select “FR WIPER STOP POSITION” in "Data Monitor" mode of “IPDM E/R”.
-
Operate the front wiper.
-
With the front wiper operation, check the monitor status.
Monitor item
Condition
Monitor status
FR WIPER STOP POSITION
Front wiper motor
Front wiper stop position
STOP P
Any position other than front wiper stop position
ACTIVE P
-
Is the inspection result normal?
YES>>Front wiper auto stop signal circuit is normal.
NO>>Refer to Diagnosis Procedure.
-
Diagnosis Procedure
Diagnosis Procedure
CHECK IPDM E/R OUTPUT VOLTAGE
Ignition switch OFF.
Disconnect front wipe ...
Other materials:
P0365 Exhaust Valve Timing Control Position Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Dtc Confirmation Procedure
DTC Confirmation Procedure
DTC CONFIRMATION
CONSULT
Ignition switch ON and wait for 2 seconds or
more.
Select “Self Diagnostic Result” mode
...
Parking brake shoe
Adjustment - Drum Brake
If equipped with drum brakes, refer to PB-11, "Inspection and
Adjustment".
Adjustment - Disc Brake
Adjust parking brake lever stroke. Refer to PB-4,
"Inspection and Adjustment".
Perform parking brake break-in (drag on) operation by
d ...
