Warning:
Do not touch bulb while it is lit or right after being turned OFF. Burning may result.
CAUTION:
Do not attempt to separate the vanity mirror lamp from the sun visor or damage to the components may occur.
Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.
Release the
pawl on the vanity mirror lamp lens (1) using a suitable tool
(A).
|
|
: Pawl |
|
|
: Front |
Grasp bulb
(A) and remove from vanity mirror lamp lens (1). 
Install bulb to vanity mirror lamp.
Install the vanity mirror lamp lens.
Removal and InstallationSteering Switch Signal a Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK STEERING SWITCH SIGNAL A CIRCUIT
Ignition switch OFF.
Disconnect combination meter harness connector
and combination switch (sp ...
When Main Power Window and Door Lock/unlock Switch Is Operated
Diagnosis Procedure
Diagnosis Procedure
CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK
SWITCH
Check main power window and door lock/unlock switch.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES ...
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...