S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information
Nissan Sentra B18 (2020-2025) Service Manual / Electrical & Power Control / Body Control System :: Preparation. Preparation. Special Service Tool

Nissan Sentra B18 (2020-2025) Service Manual: Body Control System :: Preparation. Preparation. Special Service Tool

Preparation. Special Service Tool. Special Service Tool

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number

(TechMate No.)

Tool name

Description

  —

(NI-50190)

Signal Tech II

  • Activate and display TPMS transmitter IDs

  • Display tire pressure reported by the TPMS transmitter

  • Read TPMS DTCs

  • Register TPMS transmitter IDs

  • Test remote keyless entry keyfob relative to signal strength

  • Check Intelligent Key relative signal strength

  • Confirm Nissan Sentra vehicle Intelligent Key antenna signal strength

  • Compatible with future sensors

  • Equipped with a display
    Body Control System. Precaution. Precautions. Precautions for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
    Precautions. Precautions for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner" Precautions for Supplemental Restraint System (srs) ...

    Other materials:

    Operation
    Automatic Speed Control Device (ascd) Switch Name and Function Switch Name and Function SWITCHES AND INDICATORS On the combination meter ...

    Predictive Course Line Center Position Adjustment
    Description Description Adjust the center position of the predictive course line of the rear view monitor if it is shifted. Work Procedure Work Procedure DRIVING Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of ...

    Normal Operating Condition
    Symptom Description Symptom Description FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED) If the status of that the engine speed is above 2,500 rpm under no load (at 0 km/h and the selector lever position is P or N) takes more than the specified time, fuel will be cut off after s ...