Dtc Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detected condition |
||
|---|---|---|---|---|
|
B2202-11 |
Fuel level sensor (Fuel level sensor) |
Diagnosis condition |
When ignition switch is ON. |
|
|
Signal (terminal) |
Fuel level sensor signal |
|||
|
Threshold |
Short circuit |
|||
|
Diagnosis delay time |
— |
|||
POSSIBLE CAUSE
Fuel level sensor unit and fuel pump
Combination meter
Harness or connectors
FAIL-SAFE
Low fuel level warning displays
Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “METER/M&A”.
Is DTC B2202-11 detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
Dtc Diagnosis Procedure
CHECK FUEL LEVEL SENSOR SIGNAL CIRCUIT
Check the fuel level sensor signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>Replace combination meter. Refer to Removal and Installation.
NO >>Repair or replace malfunctioning parts.
P0963 Pressure control solenoid A
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P0963
PC SOLENOID A
(Pressure Control Solenoid A
Control Circuit High)
The line pressure solenoid valve current is 200
mA or less c ...
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
at least 10 seconds before conducting the next test.
>&g ...
P2617 Crankshaft Position Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...