Nissan Sentra B18 (2020-2025) Service Manual: B203e-14 Outside Antenna
Dtc Description
DTC Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen items (Trouble diagnosis content) |
DTC detecting condition |
|
|---|---|---|---|
|
B203E–14 |
Outside antenna (Outside antenna) |
Diagnosis condition |
Work support “INSIDE/OUTSIDE ANT DIAGNOSIS”: activated |
|
Signal (terminal) |
Outside key antenna (rear door LH) signal (Intelligent Key unit connector terminal: 35, 36) |
||
|
Threshold |
Outside key antenna (rear door LH) circuit is shorted to ground |
||
|
Diagnosis delay time |
1 second or less |
||
POSSIBLE CAUSE
-
Intelligent Key unit
-
Outside key antenna (rear door LH)
-
Harness or connector [outside key antenna (rear door LH) circuit is open or shorted]
FAIL-SAFE
–
Confirmation Procedure
Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULTSelect “Self Diagnosis Result” mode of “HANDS FREE MODULE".
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair. Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 1
-
-
Ignition switch ON.
-
Check signal between Intelligent Key unit harness connector and ground using oscilloscope.
(+)
(–)
Condition
Signal
(Reference value)
Intelligent Key unit
Connector
Terminal
M155
35
Ground
When the front door request switch LH is operated with push-button ignition switch ON
When Intelligent Key is in the antenna detection area
When Intelligent Key is not in the antenna detection area
36
When Intelligent Key is in the antenna detection area
When Intelligent Key is not in the antenna detection area
-
Is the inspection result normal?
YES >>Replace Intelligent Key unit. Refer to Removal and Installation.
NO >>GO TO 2.
-
-
CHECK OUTSIDE KEY ANTENNA CIRCUIT
-
-
Ignition switch OFF.
-
Disconnect Intelligent Key unit connector and outside key antenna (rear door LH) connector.
-
Check continuity between Intelligent Key unit harness connector and outside key antenna (rear door LH) connector.
Intelligent Key unit
Outside key antenna (rear door LH)
Continuity
Connector
Terminal
Connector
Terminal
M155
35
D209
2
Yes
36
1
-
Check continuity between Intelligent Key unit harness connector and ground.
Intelligent Key unit
—
Continuity
Connector
Terminal
M155
35
Ground
No
36
-
Is the inspection result normal?
YES >>GO TO 3.
NO >>Repair or replace harness.
-
-
CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 2
-
-
Replace outside key antenna (rear door LH). (New antenna or other antenna)
-
Connect Intelligent Key unit connector and outside key antenna (rear door LH) connector.
-
Ignition switch ON.
-
Check signal between Intelligent Key unit harness connector and ground using oscilloscope.
(+)
(–)
Condition
Signal
(Reference value)
Intelligent Key unit
Connector
Terminal
M155
35
Ground
When the front door request switch LH is operated with push-button ignition switch ON
When Intelligent Key is in the antenna detection area
When Intelligent Key is not in the antenna detection area
36
When Intelligent Key is in the antenna detection area
When Intelligent Key is not in the antenna detection area
-
Is the inspection result normal?
YES >>Replace outside key antenna (rear door LH). Refer to Removal and Installation.
NO >>Replace Intelligent Key unit. Refer to Removal and Installation.
-
Other materials:
C1076-55 Control Unit
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen item
(Trouble diagnosis
content)
DTC detection condition
...
B2231-16 Battery Voltage
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detected condition
...
Unit Removal and Installation. Transaxle Assembly
Transaxle Assembly
Exploded View
Exploded View
1.
CVT fluid charging pipe cap
2.
CVT fluid charging pipe
...