Dtc Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen items (Trouble diagnosis content) |
DTC Detection Condition |
|
|---|---|---|---|
|
B107E-52 |
Air Bag Lock Mode (Air Bag Lock Mode) |
Diagnosis condition |
When ignition switch is ON. |
|
Signal (terminal) |
— |
||
|
Threshold |
Air bag diagnosis sensor unit has not been activated. |
||
|
Diagnosis delay time |
1 second or more. |
||
POSSIBLE CAUSE
Incomplete of activation for air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
CHECK SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “AIR BAG”.
Check for DTC.
Is the DTC detected?
YES>>(Current DTC) Refer to DTC Diagnosis Procedure.
YES>>(Past DTC) GO TO 2.
NO>>Inspection End.
ERASE SELF DIAGNOSTIC RESULT
CONSULT
Erase the DTC.
Can the DTC be erased?
YES>>Inspection End.
NO>>Refer to DTC Diagnosis Procedure.
Dtc Diagnosis Procedure
PERFORM AIR BAG ACTIVATE
Perform air bag diagnosis sensor unit activate.
Refer to Work Procedure.
B12b5-97 Frontal Collision DetectionDtc Diagnosis Procedure
DTC Diagnosis
Procedure
CHECK BATTERY CURRENT SENSOR POWER
Ignition switch OFF.
Disconnect battery current sensor connector.
Ignition switch ON.
...
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS ...
Oil Filter
Removal and Installation
Removal and Installation
REMOVAL
Remove the
front under cover. Refer to Removal and Installation.
Using
suitable tool (A), remove the oil filter (1).
CAUTION:
Oil filter is provided with relief valve.
Be ...