TOTAL TOE-IN
Loosen the steering outer socket.
Adjust the length using the steering inner socket.
|
Toe-in |
: Refer to Wheel Alignment (Unladen). |
CAUTION:
Always evenly adjust both toe-in alternately and adjust the difference between the left and right to the standard.
Always hold the steering inner socket when tightening the steering outer socket.
InspectionSatellite radio reception (if so equipped)
When the satellite radio is used for the first time
or the battery has been replaced, the satellite
radio may not work properly. This is not a malfunction.
Wait more than 10 minutes with satellite
radio ON and the vehicle outside of any metal or
large building for satellite radio to receive a ...
Distance Sensor Alignment
Work Procedure
Work Procedure
Always perform the radar alignment after removing and installing
or replacing the distance sensor.
Application Notice
Type
Description
...
Inspection
Inspection
INSPECTION AFTER REMOVAL
Shock Absorber
Check the following items and replace the parts
if necessary.
Check the
shock absorber for oil leaks, deformation, cracks, and other
damage.
Check the
piston rod for damage, uneven wear, and distortion.
Bound Bumper ...