Nissan Sentra B18 (2020-2025) Service Manual: Work Procedure
-
STEP 1
-
-
Ignition switch ON.
-
Operate the main power window and door lock/unlock switch to fully open the window. (This operation is unnecessary if the window is already fully open)
-
Operate the main power window and door lock/unlock switch in the UP position (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
-
Release the switch and check that AUTO-UP function operates normally.
-
GO TO 2.
-
-
STEP 2
-
Check anti-pinch function. Refer to Work Procedure.
Inspection End.
-
Description
Description
If any of the following operations are performed,
the initialization is necessary for normal operation of power window
system:
Disconnection and connection of batte ...
Other materials:
Child safety
WARNINGDo not allow children to play with the
seat
belts. Most seating positions are
equipped with Automatic Locking Retractor
(ALR) mode seat belts. If the seat belt
becomes wrapped around a child’s neck
with the ALR mode activated, the child can
be seriously injured ...
Checking engine coolant level
Check the coolant level in the reservoir when
the engine is cold. If the coolant level is below
the MIN level B , add coolant to the MAX level
A . If the reservoir is empty, check the coolant
level in the radiator when the engine is cold. If
there is insufficient coolant in the radiator, fi ...
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
CHECK VEHICLE SPECIFICATION
Check vehicle specification.
>>
GO TO 2.
PERFORM SELF DIAGNOSTIC RESULT
Ignition switch ON.
...
