Nissan Sentra B18 (2020-2025) Service Manual: Description
If any of the following operations are performed, the initialization is necessary for normal operation of power window system:
-
Disconnection and connection of battery cable from negative terminal.
-
When main power window and door lock/unlock switch replaced.
-
Electric power supply to main power window and door lock/unlock switch or front power window motor LH is interrupted by blown fuse or disconnection and connection of the negative terminal of battery, etc.
-
Disconnection and connection of main power window and door lock/unlock switch harness connector.
-
Removal of front power window motor LH from regulator assembly.
-
Operation of regulator assembly as an independent unit.
-
Removal and installation of glass.
-
Removal and installation of door glass run.
CAUTION:
The following specified operations can not be performed under the non-initialized condition:
-
Auto-up operation
-
Anti-pinch function
Work Procedure
Work Procedure
STEP 1
Ignition switch ON.
Operate the main power window and door lock/unlock ...
Other materials:
P0268 Fuel Injector (cylinder 3)
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Frp Control System
Component Inspection
Component Inspection
CHECK HIGH PRESSURE FUEL PUMP-1
Turn ignition switch OFF.
Disconnect high pressure fuel pump
harness connector.
Check the resistance between high
...
Ecm
Values on the Diagnosis Tool
Values On The Diagnosis Tool
VALUES ON THE DIAGNOSIS TOOL
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display ...
