Nissan Sentra B18 (2020-2025) Service Manual: Without Washer Level Switch
Exploded View
|
1. |
Washer tank inlet |
2. |
Washer tank |
A. |
Washer tank pump (not serviced separately) |
Removal and Installation
REMOVAL
Remove the washer tank inlet.
Remove the front combination lamp (RH). Refer to Removal and Installation (Halogen Headlamp) or Removal and Installation (LED Headlamp).
Disconnect the harness connector from the washer pump.
Disconnect the washer tube from the washer pump.
Remove the washer tank bolts and the washer tank.
INSTALLATION
Installation is in the reverse order of removal.
Note:
-
After installation, add water to the top of the washer tank inlet to check that no leaks exist.
-
Fill washer tank with specified amount of fluid. Refer to Specifications.
With Washer Level Switch
Exploded View
Exploded View
1.
Washer tank inlet
2.
...
Washer Pump
...
Other materials:
Nvh Troubleshooting Chart
NVH Troubleshooting Chart
Use the chart below to find the cause of the
symptom. The numbers indicate the order of the inspection. If
necessary, repair or replace these parts.
...
P0604 ECM
DTC Logic
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P0604
ECM
[Internal control module
random access memory
(RAM) error]
Malfunction in the internal RAM of ECM.
ECM
DTC CON ...
Dlc branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the data link connector for
damage, bend and loose connection
(connector side and harness side).
Is the inspection resul ...
