Nissan Sentra B18 (2020-2025) Owner's Manual: Windshield-washer fluid
Windshield-washer fluid reservoir

Periodically fill the windshield-washer fluid reservoir. Add washer fluid whenever the "Low Washer Fluid" warning message (if so equipped) appears in the vehicle information display of your Nissan Sentra.
To check the washer fluid level, place your finger over the center hole 1 of the cap/tube assembly, then remove it from the reservoir.
If no fluid is present in the tube, add windshield-washer fluid.
For improved cleaning performance, use a washer solvent. During winter operation, add windshield washer antifreeze and follow the manufacturer’s recommended mixture ratios.
Refill the reservoir more frequently when driving conditions require increased use of the windshield washers.
The recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or an equivalent product.
CAUTION
- Do not substitute engine antifreeze for windshield-washer fluid.
- This may damage the vehicle paint and exterior surfaces.
- Do not fill the reservoir with washer fluid concentrates at full strength. Some methyl alcohol-based washer concentrates may permanently stain the grille if spilled during filling.
- Always pre-mix washer fluid concentrates with water according to the manufacturer’s instructions before adding them to the reservoir. Do not mix fluids directly inside the windshield-washer reservoir.
Other materials:
Power Supply and Ground Circuit
A/c Auto Amp.
Diagnosis Procedure
Diagnosis Procedure
CHECK A/C AUTO AMP. GROUND CIRCUIT
FOR OPEN
Ignition switch OFF.
Disconnect A/C auto amp. connector.
...
Door Does Not Lock/unlock and Engine Does Not Start (req Sw/push Sw) (all Keys)
Description
Description
All doors do not lock/unlock using door request
switch or trunk does not open using trunk opener request switch,
and engine does not start when push-button ignition switch is
pressed while carrying Intelligent Key.
Note:
Before starting diagnosis check tha ...
Diagnosis System (ipdm E/r)
Consult Function (ipdm E/r)
CONSULT Function
(IPDM E/R)
APPLICATION ITEM
CONSULT performs the following functions via CAN
communication with IPDM E/R:
Diagnosis mode
CGW Status
...