Nissan Sentra B18 (2020-2025) Service Manual: When Power Window and Door Lock/unlock Switch Rh Is Operated

Nissan Sentra B18 (2020-2025) Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Power Window Control System :: Symptom Diagnosis / Front Passenger Side Power Window Does Not Operate / When Power Window and Door Lock/unlock Switch Rh Is Operated

Diagnosis Procedure

Diagnosis Procedure

CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH POWER SUPPLY AND GROUND CIRCUIT
1. Check power window and door lock/unlock switch RH power supply and ground circuit.
  
  Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>
GO TO 2.
NO >>
Repair or replace the malfunctioning parts.
CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
1. Check power window and door lock/unlock switch RH.
  
  Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>
GO TO 3.
NO >>
Repair or replace the malfunctioning parts.
REPLACE POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
1. - Replace power window and door lock/unlock switch RH. Refer to Removal and Installation.
  - Confirm the operation after replacement.
Is the result normal?
YES >>
Inspection End.
NO >>
Check intermittent incident. Refer to Intermittent Incident.

When Both Main Power Window and Door Lock/unlock Switch and Power Window and Door Lock/unlock Switch Rh Are Operated

Diagnosis Procedure Diagnosis Procedure CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH Check power window and door lock/unlock switch ...

When Main Power Window and Door Lock/unlock Switch Is Operated

Diagnosis Procedure Diagnosis Procedure CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH Check main power window and door lock/unlock switch. ...

Other materials:

C1f4f-82 Bcm Can Circuit 1
Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection conditi ...

Dtc Confirmation Procedure
DTC Confirmation Procedure TIRE PRESSURE SENSOR ID REGISTRATION Perform tire pressure sensor ID registration. Refer to Work Procedure. >> GO TO 2. PERFORM DTC CONFIRMATION ...

Periodic Maintenance Operation
Periodic Maintenance Operation ADJUSTMENT CAUTION: Burnish the brake contact surfaces after refinishing or replacing rotors, after replacing pads, after refinishing or replacing drums, after replacing shoes, or if a soft pedal occurs at very l ...