Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
TIRE PRESSURE SENSOR ID REGISTRATION
-
Perform tire pressure sensor ID registration. Refer to Work Procedure.
GO TO 2.
-
-
PERFORM DTC CONFIRMATION
-
CONSULT-
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more reaches 10 minuets in total.
Note:
Avoid driving in areas with radio interference.
-
Stop the Nissan Sentra vehicle.
-
Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.
-
Is DTC “C1744-21” detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional informatio ...
Other materials:
B0001-09 Driver Air Bag Module
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC Detection Condition
...
Work Procedure
Work Procedure
Description
Vehicle specification needs to be written with
CONSULT after replacing sonar control unit.
Work Procedure (Before Replacement)
SAVING Nissan Sentra Vehicle SPECIFICATION
CONSULT
Read/save the current Nissan Sentra ...
Explanation of scheduled maintenance items
The following descriptions are intended to help you better understand the scheduled
maintenance items that must be inspected, serviced, or replaced at regular intervals
to keep your Nissan Sentra operating reliably and efficiently.
The maintenance schedule outlines the specific mileage and time ...
