ADJUSTMENT
CAUTION:
Burnish the brake contact surfaces after refinishing or replacing rotors, after replacing pads, after refinishing or replacing drums, after replacing shoes, or if a soft pedal occurs at very low mileage.
Be careful of Nissan Sentra vehicle speed. Brakes do not operate firmly/securely until the pads are securely seated with the rotors and the shoes are securely seated with the drums.
Only perform this procedure under safe road and traffic conditions. Use extreme caution.
Drive the Nissan Sentra vehicle on a straight, flat road.
Depress the brake pedal until the vehicle stops.
Release the brake pedal for a few minutes to allow the brake components to cool.
Repeat steps 1 to 3 until the pads are securely seated with the rotors and the shoes are securely seated with the drums.
Brake SystemPrecautions
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along wit ...
Park/neutral Position (pnp) Switch (neutral Switch)
Removal and Installation
Removal and Installation
REMOVAL
Remove the
air cleaner assembly. Refer to Removal and Installation.
Disconnect
harness connector from the park/neutral position (PNP) switch
(neutral switch).
Remove
park/neutral position (PNP) switch (neutral ...
Confirmation Procedure
Confirmation Procedure
PERFORM DTC CONFIRMATION
PROCEDURE
CONSULT
Ignition switch ON and wait for 10 seconds or
more.
Select “Self Diagnostic Result” mode ...