Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON and wait for 10 seconds or more.
-
Select “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
-
Is DTC detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair. Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
...
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
CHECK DOOR REQUEST SWITCH INPUT
SIGNAL
Ignition switch OFF.
...
Other materials:
Headlamp Aiming Adjustment
Aiming Adjustment
Aiming Adjustment
PREPARATION BEFORE ADJUSTING
Before performing aiming adjustment, check the
following:
Ensure all tires are inflated to correct
pressure.
Place Nissan Sentra vehicle and screen on level surface.
...
Steering Wheel
Steering Wheel
Steering wheel axial end
play
0 mm (0 in)
Steering wheel play
0-35 mm (0-1.38 in)
...
Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system uses
various sensors to monitor driver inputs and vehicle
motion. Under certain driving conditions,
the VDC System helps to perform the following
functions:
Controls brake pressure to reduce wheel
slip on one slipping drive wheel so power is
trans ...
