Nissan Sentra B18 (2020-2025) Service Manual: Trunk Rear Plate
Removal and Installation
REMOVAL
Remove trunk floor trim. Refer to Exploded View.
Remove
clips (A).
Using a suitable tool, release clips and remove trunk rear plate. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that clips and pawls are accurately aligned with the holes on body panel, then press in.
Exploded View
Exploded View
1.
Trunk side finisher (LH)
2.
...
Trunk Side Finisher
Removal and Installation
Removal and Installation
REMOVAL
Remove
trunk rear plate. Refer to Removal and Installation.
Remove rear
seat bolster. Refer to Removal and Installation †...
Other materials:
C1f6b-54 Camera Unit
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat
belt pre-tensioner"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injur ...
Fuel injector
Component Function Check
1.INSPECTION START
Turn ignition switch to START.
Is any cylinder ignited?
YES >> GO TO 2.
NO >> Proceed to EC-450, "Diagnosis Procedure".
2.CHECK FUEL INJECTOR FUNCTION
With CONSULT
Start engine.
Perform “POWER BALANCE” in Р...
