Nissan Sentra B18 (2020-2025) Service Manual: Trunk Side Finisher
Removal and Installation
REMOVAL
Remove trunk rear plate. Refer to Removal and Installation.
Remove rear seat bolster. Refer to Removal and Installation — Rear Seat Bolster.
Position rear seatback forward.
Using a suitable tool, release clips and remove rear seatback finisher. Refer to Exploded View.
Using a suitable tool, release clips and remove trunk side finisher. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Insert rear end of trunk side finisher into trunk weather strip.
-
When installing, check that clips are accurately aligned with the holes on body panel, then press in.
Trunk Rear Plate
Removal and Installation
Removal and Installation
REMOVAL
Remove
trunk floor trim. Refer to Exploded View.
Remove
clips (A).
Using a
suitable tool, release clips and ...
Trunk Lid Trim
...
Other materials:
Front passenger air bag and status light
WARNING
The front passenger air bag and front passenger supplemental knee air bag
in the Nissan Sentra are designed to automatically turn OFF under certain conditions.
Carefully read this section to fully understand how this system operates.
Correct use of the seat, seat belt and child ...
Ecm, Bcm, Ipdm E/r
List of Ecu Reference
List of ECU
Reference
ECU
Reference
ECM
Values On The Diagnosis Tool
...
Engine oil and oil filter recommendations
Selecting the correct oil
It is essential to choose the correct grade, quality
and viscosity engine oil to ensure satisfactory
engine life and performance. See “Recommended
fluids/lubricants and capacities” in this
section. NISSAN recommends the use of an
energy conserving oil in order ...
