Nissan Sentra B18 (2020-2025) Service Manual: Trunk Lid Striker
Removal and Installation
REMOVAL
Remove the trunk rear finisher. Refer to Removal and Installation.
Remove bolts (A).
Remove
trunk lid striker (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
After installation, check trunk lid open/close, lock/unlock operation.
-
After installation, perform the trunk lid adjustment procedure. Refer to Adjustment.
Trunk Lid Assembly
Removal and Installation
Removal and Installation
CAUTION:
Use two people when removing or installing trunk
lid assembly due to its heavy weight.
...
Trunk Lid Hinge
Removal and Installation
Removal and Installation
REMOVAL
Remove
trunk lid assembly. Refer to Removal and Installation.
Release
harness retainers (A) from trunk lid hinge (LH only). ...
Other materials:
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...
Noise, Vibration and Harshness (nvh) Troubleshooting
Nvh Troubleshooting Chart
NVH troubleshooting Chart
1.
Timing chain
2.
Water pump
3.
...
Removal and Installation
Removal and Installation
REMOVAL
Set the
front wheels and tires to the straight-ahead position.
Remove
driver air bag module. Refer to Removal and Installation.
Disconnect
steering switches harness connector from spiral cable.
Remove
steering wheel bolt.
CAUTION ...
