Nissan Sentra B18 (2020-2025) Service Manual: Trunk Lid Hinge
Removal and Installation
REMOVAL
Remove trunk lid assembly. Refer to Removal and Installation.
Release
harness retainers (A) from trunk lid hinge (LH only).
Remove torsion bar. Refer to Removal and Installation.
Remove rear parcel shelf finisher. Refer to Removal and Installation.
Remove trunk lid hinge bolts (body side) and then trunk lid hinge.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
After installation, check trunk lid open/close, lock/unlock operation.
-
After installation, perform the trunk lid adjustment procedure. Refer to Adjustment.
-
Apply touch-up paint (body color) onto the heads of trunk lid hinge bolts.
Trunk Lid Striker
Removal and Installation
Removal and Installation
REMOVAL
Remove the
trunk rear finisher. Refer to Removal and Installation.
Remove
bolts (A).
Remove
trunk lid striker (1).
...
Torsion Bar
Removal and Installation
Removal and Installation
REMOVAL
Remove
torsion bar clip.
Support the
trunk lid using suitable tool.
Warning:
Bodily injury may occur if trunk ...
Other materials:
C1083-86 Steering Angle Sensor System
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen item
(Trouble diagnosis
content)
DTC detection condition
...
Brake pedal
Adjustment
BRAKE PEDAL HEIGHT
Remove instrument lower panel LH. Refer to IP-21, "Removal and
Installation".
Disconnect the harness connectors from the brake pedal position switch
(if equipped) and the stop lamp
switch.
Turn the stop lamp switch and brake pedal position swi ...
Wiring diagram
Can system
Wiring Diagram
...
