REMOVAL
Set the front wheels and tires to the straight-ahead position.
Remove driver air bag module. Refer to Removal and Installation.
Disconnect steering switches harness connector from spiral cable.
Remove steering wheel bolt.
CAUTION:
Do not reuse bolt.
Remove steering wheel using suitable tool.
CAUTION:
Place a piece of tape across spiral cable so it will not be rotated out of position.
Inspect steering wheel near puller holes for damage. If damaged, replace steering wheel.
Remove the following parts from the steering wheel (if necessary):
Steering switches
Finisher
INSTALLATION
Align spiral cable correctly before installing steering wheel. Make sure that spiral cable is in neutral position ending up with locating pin (A) on top.
During steering wheel installation, make sure spiral cable locating pin (A) is aligned with slot (B) on back of steering wheel.
CAUTION:
If cable is not installed in correct position, spiral cable may snap by turning steering wheel beyond limited number of turns.
Align center mark (A) on steering column shaft (B) with center mark (C) on steering wheel hub (D).
Installation of remaining components is in the reverse order of removal.
Exploded View
Steering ColumnGeneral Specifications
General Specifications
Unit: mm (in)
Master cylinder
Cylinder bore diameter
25.4 (1)
Brake booster
Diaphragm
...
Removal and Installation
Removal and Installation
REMOVAL
Remove
front seat assemblies. Refer to the following.
Refer to Removal and Installation - Seat Assembly
(Driver Seat).
Refer to Removal and Installation - Seat Assembly
(Passenger Seat).
Remove rea ...
Diagnosis system (BCM) (without intelligent key system)
Common item
Common item : consult function (bcm - common item)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode
Description
ECU identification
The BCM part number is displayed.
Self Diagnostic Result
...