Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: System Settings Cannot Be Turned On/off

Description

Description

RAB system does not turn ON/OFF. Refer to Diagnosis Procedure.

Note:

The system ON/OFF condition will be memorized even if the ignition switch turns OFF.

Diagnosis Procedure

Diagnosis Procedure

  1. PERFORM THE SELF-DIAGNOSIS

    1. Perform “All DTC Reading” with CONSULT.

    2. Check if the DTC is detected in self-diagnosis results for “ICC/ADAS 2” with CONSULT. Refer to DTC Index.

    Is any DTC detected?

    YES >>

    GO TO 4.

    NO >>

    GO TO 2.

  2. RAB WARNING LAMP

    Check if the RAB warning lamp illuminates when the turn ignition switch.

    Is the inspection result normal?

    YES >>

    Refer to Work Flow.

    NO >>

    GO TO 3.

  3. CHECK COMBINATION METER

    Perform On Board Diagnosis of combination meter. Refer to On Board Diagnosis Function(with Type A meter) or On Board Diagnosis Function (with Type B meter).

    Is the inspection result normal?

    YES >>

    Replace the ADAS control unit 2. Refer to Removal and Installation.

    NO >>

    Replace the combination meter. Refer to Removal and Installation(4.2 inch Information Display) or Removal and Installation(7 inch Information Display).

  4. REPAIR OR REPLACE MALFUNCTIONING PARTS

    Repair or replace malfunctioning parts.

    >>

    GO TO 6.

  5. CHECK RAB SYSTEM

    • Check that RAB warning lamp turned ON⇔OFF, when operating steering switch. (With 7 inch information switch)

    • Check that RAB warning lamp turned ON⇔OFF, when operating AEB switch. (With 3.5 inch information switch)

    >>

    INSPECTION END

Rear Automatic Braking
Symptom Table Symptom Table CAUTION: Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected. ...

Other materials:

B20d2-11 Parking Lamp Pwr Sply Circ
Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition ...

Diagnosis System (a/c Amp.)
Diagnosis Description Diagnosis Description CONSULT performs the following functions via CAN communication with A/C amp.: Diagnostic mode CGW Status Descrip ...

P0706 Transmission range sensor A
DTC Logic DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition Possible causes P0706 T/M RANGE SENSOR A (Transmission Range Sensor A Circuit Range/Performance) All range signals stay OFF continuously for 30 sec ...

© 2014-2026 Copyright www.nisentra.com