Nissan Sentra manuals

Nissan Sentra Service Manual: System description

Service Notice and Precautions for EPS System
Check the following item when performing the trouble diagnosis. Check any possible causes by interviewing the symptom and it′s condition from the customer if any malfunction, such ...

Component parts
Component Parts Location EPS control unit (view with steering column removed from vehicle) EPS motor (view with steering column removed from vehicle) Torque sensor (view with ...

Other materials:

Power windows do not operate with power window main switch
Diagnosis Procedure 1.Check bcm power supply and ground circuit Check bcm power supply and ground circuit. Refer to bcs-67, "diagnosis procedure" (with intelligent key) or bcs-120, "diagnosis procedure" (without intelligent key). Is the inspection result normal? Yes & ...

Dtc/circuit diagnosis
U1000 can comm circuit Description Refer to lan-7, "can communication system : system description". DTC Logic Dtc detection logic Note: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual can diagnostic sym ...

Normal operating condition
Description Symptom Result Slight vibrations are felt on the brake pedal and operation noises occur when VDC, TCS or ABS is activated. This is a normal condition due to the VDC, TCS or ABS activation. Stopping distance is longer than that of vehicles without ...

В© 2014-2025 Copyright www.nisentra.com