Nissan Sentra manuals

Nissan Sentra Service Manual: System description

Preparation
Special Service Tool The actual shape of the tools may differ from those illustrated here. ...

Component parts
Component Parts Location BCM (view under instrument panel on the left side of the vehicle) Front power window motor LH (RH similar) (view with front door finisher removed) Rear powe ...

Other materials:

Power generation voltage variable control system operation inspection
Diagnosis Procedure Regarding wiring diagram information. Refer to chg-9, "wiring diagram". Caution: When performing this inspection, always use a charged battery that has completed the battery inspection. (When the charging rate of the battery is low, the response speed of the vol ...

How to erase permanent  DTC
Description OUTLINE When a DTC is stored in ECM When a DTC is stored in ECM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw. *1: When the same malfunction is detec ...

Diagnosis description : counter system
RELATIONSHIP BETWEEN MIL, 1ST TRIP DTC, DTC, AND DETECTABLE ITEMS When a malfunction is detected for the first time, the 1st trip DTC and the 1st trip freeze frame data are stored in the ECM memory. When the same malfunction is detected in two consecutive trips, the DTC and the freeze ...

В© 2014-2026 Copyright www.nisentra.com