Nissan Sentra B18 (2020-2025) Service Manual: Steering Switches
Exploded View
|
1. |
Steering wheel |
2. |
Steering wheel finisher |
3. |
Steering switches |
Removal and Installation
REMOVAL
Note:
The steering switches are serviced as an assembly.
Remove driver air bag. Refer to Removal and Installation.
Release
pawls on the steering wheel front finisher (1) using suitable tool
and remove from the steering wheel.
|
|
: Pawl |
Release
pawls on the steering switches (1) using suitable tool and remove
from the steering wheel.
|
|
: Pawl |
Disconnect steering switch connector from spiral cable and remove from Nissan Sentra vehicle.
INSTALLATION
Installation is in the reverse order of removal.
Av Control Unit
Exploded View
Exploded View
1.
AV control unit bracket
(LH)
...
Microphone
Removal and Installation
Removal and Installation
REMOVAL
Remove the
front room/map lamp assembly. Refer to Removal and Installation.
Release
pawls and remove microphone (1) from t ...
Other materials:
REMOVAL
Release the rear sonar sensor cover
(1) pawls using suitable tool and remove the rear sonar sensor outer
(2).
:Pawl
Remove the rear sonar sensor cover
from the bumper fa ...
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
at least 10 seconds before conducting the next test.
>&g ...
Special Service Tool
Special Service Tool
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
Description
...
