Nissan Sentra B18 (2020-2025) Service Manual: REMOVAL
Release the rear sonar sensor cover
(1) pawls using suitable tool and remove the rear sonar sensor outer
(2).
|
|
:Pawl |
Remove the rear sonar sensor cover from the bumper fascia (if necessary).
CAUTION:
-
If the rear sonar sensor cover is replaced, clean area before installation.
-
Do not reuse sonar sensor cover (outer).
Other materials:
Symptom Diagnosis. Push-Button Ignition Switch Does Not Operate
Push-Button Ignition Switch Does Not Operate
Diagnosis Procedure
Diagnosis Procedure
Check that vehicle is under the condition shown
in “Conditions of vehicle� before starting diagnosis, and check each
symptom.
Note:
The engine start function, door lock function,
power dis ...
Intake Sensor
Component Inspection
Component Inspection
CHECK INTAKE SENSOR
Ignition switch OFF.
Remove intake sensor. Refer to Removal and Installation.
Check res ...
System Settings Cannot Be Turned On/off
Diagnosis Procedure
Diagnosis Procedure
CHECK SYSTEM SETTING
Turn ignition switch ON.
Check that the each system settings is
selectable on the combination meter.
Is the inspection result norma ...
