Nissan Sentra B18 (2020-2025) Service Manual: Shipping Mode Control System
System Description
SYSTEM DIAGRAM
OUTLINE
The BCM has the shipping mode control system function that reduces the drain on the battery during extended storage.
Signal transmission function list
|
Signal name |
Input |
Output |
Description |
|---|---|---|---|
|
Shipping mode status signal |
BCM |
Combination meter (CAN) |
Transmits the shipping mode status signal via CAN communication. |
DESCRIPTION
-
The BCM switches the status (shipping mode or normal mode) by itself according to the extended storage switch condition, and transmits the shipping mode status signal to the combination meter and each unit via CAN communication.
-
When the shipping mode function is activated, the control units will not detect DTCs.
-
BCM control functions are limited in shipping mode. Refer to Description.
-
When the BCM is in shipping mode, a message may be shown in the combination meter or information display.
-
For shipping mode cancel operation, refer to Work Procedure.
Power Consumption Control System
System Description
System Description
SYSTEM DIAGRAM
INPUT SIGNAL AND OUTPUT SIGNAL
Major signal transmission between each unit via
communication is shown in the following table:
...
Other materials:
Power window motor
DRIVER SIDE
DRIVER SIDE : Description
Door glass moves up/down by receiving the signal from main power window and
door lock/unlock switch
DRIVER SIDE : Component Function Check
1. Check front power window motor lh circuit
Check front power window motor lh operation with the main power window ...
C1700-54 Control Unit
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure rep ...
Periodic maintenance
Road wheel
Inspection
ALUMINUM WHEEL
Check tires for wear and improper inflation.
Check wheels for deformation, cracks and other damage. If deformed,
remove wheel and check wheel
runout.
Remove tire from aluminum wheel and mount wheel on a balancer machine.
Set dial indicator as ...