Nissan Sentra manuals

Toyota Camry Owner's Manual (2023): Selecting constant speed control mode - Dynamic radar cruise control with full-speed range

Toyota Camry Owner's Manual (2023) / Driving / Using the driving support systems / Selecting constant speed control mode - Dynamic radar cruise control with full-speed range

When constant speed control mode is selected, your vehicle will maintain a set speed without controlling the vehicle-to-vehicle distance.

Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar, etc.

1. With the cruise control off, press and hold the cruise control main switch for 1.5 seconds or more.

Immediately after the switch is pressed, the dynamic radar cruise control indicator will come on.

Afterwards, it switches to the cruise control indicator.

Switching to constant speed control mode is only possible when operating the switch with the cruise control off.

Using the driving support systems

2. Accelerate or decelerate, with accelerator pedal operation, to the desired vehicle speed (at or above approximately 20 mph [30 km/h] ) and press the "- SET" switch to set the speed.

Cruise control "SET" indicator will come on.

The vehicle speed at the moment the switch is released becomes the set speed.

Using the driving support systems

■Dynamic radar cruise control with full-speed range can be set when

■Accelerating after setting the vehicle speed

The vehicle can accelerate by operating the accelerator pedal. After accelerating, the set speed resumes. However, during vehicle-to-vehicle distance control mode, the vehicle speed may decrease below the set speed in order to maintain the distance to the preceding vehicle.

■When the vehicle stops while follow-up cruising

■Automatic cancelation of vehicle-to-vehicle distance control mode

Vehicle-to-vehicle distance control mode is automatically canceled in the following situations:

If vehicle-to-vehicle distance control mode is automatically canceled for any reasons other than the above, there may be a malfunction in the system.

Contact your Toyota dealer.

■Automatic cancelation of constant speed control mode

Constant speed control mode is automatically canceled in the following situations:

If constant speed control mode is automatically canceled for any reasons other than the above, there may be a malfunction in the system. Contact your Toyota dealer.

■Situations in which the curve speed reduction function may not operate

In situations such as the following, the curve speed reduction function may not operate:

■Brake operation

A brake operation sound may be heard and the brake pedal response may change, but these are not malfunctions.

■Warning messages and buzzers for dynamic radar cruise control with full-speed range

Warning messages and buzzers are used to indicate a system malfunction or to inform the driver of the need for caution while driving. If a warning message is shown on the multi-information display, read the message and follow the instructions.

■When the sensor may not be correctly detecting the vehicle ahead

In the case of the following and depending on the conditions, operate the brake pedal when deceleration of the system is insufficient or operate the accelerator pedal when acceleration is required.

As the sensor may not be able to correctly detect these types of vehicles, the approach warning may not be activated.

Using the driving support systems

Using the driving support systems

Using the driving support systems

■Conditions under which the vehicle-to-vehicle distance control mode may not function correctly

In the case of the following conditions, operate the brake pedal (or accelerator pedal, depending on the situation) as necessary.

As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.

Using the driving support systems

Using the driving support systems

■Situations in which the curve speed reduction function may not operate properly

In situations such as the following, the curve speed reduction function may not operate properly:

Approach warning (vehicle-to-vehicle distance control mode) - Dynamic radar cruise control with full-speed range
When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driv ...

Dynamic radar cruise control
Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates and decelerates to match the speed changes of the preceding vehicle even if the accelerator p ...

Other materials:

The parking brake release warning continues displaying, or does not display
Description The parking brake warning is displayed while driving the vehicle even though the parking brake is released. The parking brake warning is not displayed while driving the vehicle even though the parking brake is applied. Diagnosis procedure 1.Check parking brake warning l ...

Replacing
Replace the wiper blades if they are worn. To replace the windshield wiper blades, follow the procedure below: When ignition switch is ON or within 60 seconds after placing the ignition switch from ON to OFF position. Quickly push the windshield wiper and washer lever to the mist pos ...

Removal and installation
Power socket Removal and installation Front console power socket Removal Remove the cvt/mt shift selector finisher. Refer to ip-14, "exploded view". Remove cap from the front console power socket. Remove the screws (a) and the storage bin (1). Disconnect the harness ...

© 2014-2023 Copyright www.nisentra.com