Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation. Ipdm E/r
Ipdm E/r
Exploded View
Exploded View
|
1. |
IPDM E/R |
2. |
IPDM E/R cover A |
3. |
IPDM E/R harness cover B |
|
4. |
IPDM E/R case |
5. |
IPDM E/R harness cover C |
6. |
IPDM E/R harness cover D |
Removal and Installation
Removal and Installation
CAUTION:
-
IPDM E/R integrated relays are not serviceable and must not be removed from unit.
-
Be sure to perform “ADDITIONAL SERVICE WHEN REPLACING IPDM E/R� when replacing IPDM E/R. Refer to Work Procedure.
REMOVAL
Disconnect the negative battery terminal. Refer to Battery Disconnect.
Release
pawls and remove IPDM E/R cover A (1).
:
Pawl
Release
pawls on IPDM E/R (1) and remove.
:
Pawl
Disconnect
harness connectors from the IPDM E/R (1) and remove.
INSTALLATION
CAUTION:
Be sure to perform “ADDITIONAL SERVICE WHEN REPLACING IPDM E/R� when replacing IPDM E/R. Refer to Work Procedure.
Installation is in the reverse order of removal.
Other materials:
P0010 Intake Valve Timing Control
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Service Equipment
Service Equipment
RECOVERY/RECYCLING EQUIPMENT
Follow the manufacturer's instructions for machine
operation and machine maintenance. Do not introduce any refrigerant
other than that specified into the machine.
ELECTRONIC LEAK DETECTOR
Follow the manufacturer's instructions for tester ...
Intelligent Cruise Control System Symptoms
Symptom Table
Symptom Table
Symptoms
Reference page
Operation
ICC MAIN switch does not
turn ON
...