Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation. Eco Mode Switch

Eco Mode Switch

Removal and Installation

Removal and Installation

REMOVAL

Remove instrument lower panel LH. Refer to Removal and Installation.

Release pawls using a suitable tool and remove ECO mode switch.

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

    Symptom Diagnosis. The Eco Mode Indicator Lamp Does Not Turn on
    The Eco Mode Indicator Lamp Does Not Turn on Diagnosis Procedure Diagnosis Procedure CHECK ECO MODE OPERATION Ignition switch ON. Check ECO mode indicator turns ON/OFF on combin...

    Other materials:

    Knock Sensor
    Component Inspection Component Inspection CHECK KNOCK SENSOR Turn ignition switch OFF. Disconnect knock sensor harness connector. Check resistance between knock sensor terminals ...

    C1700-86 Control Unit
    Dtc Description DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure rep ...

    U2152-87 Can Comm Err (adas Control Unit)
    Dtc Description DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan ...