Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove the cowl top. Refer to Removal and Installation.
Disconnect the harness connector from the wiper drive assembly.
Remove the wiper drive assembly bolts.
Remove the wiper drive assembly.
INSTALLATION
Install the wiper drive assembly.
Tighten the
wiper drive assembly bolts to specification in the sequence
shown.
|
Bolts |
: 8 Nm (0.82 kg-m, 71 in-lb) |
Connect the harness connector to the wiper drive assembly.
Install the cowl top. Refer to Removal and Installation.
Check the operation of the wiper blades and that they stop at the normal position.
Exploded View
Exploded View
1.
Wiper blade (RH)
2.
...
Other materials:
Exploded View
Exploded View
1.
LATCH bracket (LH/RH)
A.
Refer to Removal and Installation.
...
B120e-04 Ipdm E/r
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC detection condition
...
P0605 Ecm
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
