Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
CAUTION:
-
After installing glass lid, check gap/height adjustments and operation to make sure there is no malfunction.
-
Handle glass lid with care to prevent damage.
Open sunshade and close glass lid.
Remove
inner blind [1 (LH/RH)]. 
Note: 
RH shown; LH similar.
:
Front
Remove
glass lid bolts [A (LH/RH)]. 
Note:
RH shown; LH similar.
:
Front
Remove glass lid from moonroof unit assembly (1).
INSTALLATION
Position glass lid to moonroof unit assembly.
Tighten
glass lid bolts. Note:
First tighten the front bolt (LH), then the rear bolt (RH) on the moonroof lid assembly to prevent uneven torque while tightening the remaining the remaining bolts
After installation, check moonroof operation and glass lid alignment. Refer to Adjustment.
Glass Lid
...
Adjustment
Adjustment
1.
Roof panel
2.
...
Other materials:
Structure and Operation
Sectional View
Sectional View
1.
3rd input gear
2.
3rd-4th synchronizer hub
assembly
...
Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Commercial Service Tool
...
Rear window and outside mirror (if so equipped)
defroster switch
To defrost the rear window glass and outside
mirror (if so equipped), start the engine and push
the rear window defroster switch on. The rear
window defroster indicator light on the switch
comes on. Push the switch again to turn the
defroster off.
The rear window defroster automatically ...
