Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Using
suitable tool, release clips and pawls and remove main power window
and door lock/unlock switch finisher (1). 
|
|
: Pawl |
|
|
: Clip |
Disconnect the harness connectors from the main power window and door lock/unlock switch and door mirror remote control switch.
Using a
suitable tool, release pawls and remove the main power window and
door lock/unlock switch (1) from the main power window and door
lock/unlock switch finisher (2). 
|
|
: Pawl |
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When the main power window and door lock/unlock switch is disconnected from the harness connector perform "ADDITIONAL SERVICE WHEN REPLACING MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH". Refer to Description.
Other materials:
Application Notice
Information
Information
Service information
Design of combination
meter
TYPE A
TYPE B
...
Steering Angle
Steering Angle
Unit: Degree minute (Decimal Degree)
Inner wheel angle (A)
Minimum
36° 50′
(36.5°)
...
Center Pillar Upper Finisher
Removal and Installation
Removal and Installation
REMOVAL
Remove
center pillar lower finisher. Refer to Removal and Installation.
Pull seat
belt height adjuster cover in the direction shown and
remove.
:
Pawl
Remove
D-ring anchor bolt (A).
Remove ...
