Nissan Sentra B18 (2020-2025) Service Manual: Power Window and Door Lock/unlock Switch Rh

Removal and Installation

Removal and Installation REMOVAL Using suitable tool, release clips and pawls and remove main power window and door lock/unlock switch finisher (1). ...

Removal and Installation

Removal and Installation REMOVAL Using a suitable tool, release clips and pawls and remove the power window and door lock/unlock switch RH assembly (1). ...

Other materials:

Precaution for Liquid Gasket
REMOVAL OF LIQUID GASKET After removing nuts and bolts, separate the mating surface, using Tool and remove old liquid gasket. Tool number : KV10111100 (J-37228) CAUTION: Be careful not to damage the mating surfaces. Tap (1) Tool to insert it, and then slide it (2) by tapping on t ...

Evap leak check
Inspection CAUTION: Do not use compressed air or a high pressure pump. Do not exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP system. NOTE: Do not start engine. Improper installation of EVAP service port adapter [commercial service tool: (J-41413-OBD)] to the EVAP ...

Dtc Confirmation Procedure
DTC Confirmation Procedure DTC CONFIRMATION CONSULT Ignition switch ON and wait for 2 seconds or more. Select “Self Diagnostic Result” mode ...