S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information
Nissan Sentra B18 (2020-2025) Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Power Window Control System :: Removal and Installation

Nissan Sentra B18 (2020-2025) Service Manual: Power Window Control System :: Removal and Installation

Main Power Window and Door Lock/unlock Switch. Removal and Installation. Removal and Installation

Removal and Installation

REMOVAL

Using suitable tool, release clips and pawls and remove main power window and door lock/unlock switch finisher (1).

: Pawl

: Clip

Disconnect the harness connectors from the main power window and door lock/unlock switch and door mirror remote control switch.

Using a suitable tool, release pawls and remove the main power window and door lock/unlock switch (1) from the main power window and door lock/unlock switch finisher (2).

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

When the main power window and door lock/unlock switch is disconnected from the harness connector perform "ADDITIONAL SERVICE WHEN REPLACING MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH". Refer to Description.

Power Window and Door Lock/unlock Switch Rh. Removal and Installation. Removal and Installation

Removal and Installation

REMOVAL

Using a suitable tool, release clips and pawls and remove the power window and door lock/unlock switch RH assembly (1).

: Pawl

: Clip

Disconnect the harness connector from the power window and door lock/unlock switch RH.

Using a suitable tool, release the pawls and remove the power window and door lock/unlock switch RH (1) from the power window and door lock/unlock switch RH finisher (2).

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

Rear Power Window Switch. Removal and Installation. Removal and Installation

Removal and Installation

REMOVAL

Using a suitable tool, release clips and pawls and remove rear power window switch finisher (1). Note:

RH shown; LH similar

: Pawl

: Clip

Disconnect the harness connector from the rear power window switch.

Using a suitable tool, release the pawls and remove the rear power window switch (1) from the rear power window switch finisher (2). Note:

RH shown; LH similar

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

    Power Window Control System. Symptom Diagnosis
    Power Windows Do Not Operate with Main Power Window and Door Lock/unlock Switch. Diagnosis Procedure Diagnosis Procedure Diagnosis Procedure CHECK BCM POWER SUPPLY AND GROUND CI...
    Roof. Precaution. Precautions
    Precautions Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner" Precaution for Supplemental Restraint System (SRS) "AI...

    Other materials:

    Power Supply, Ground & Circuit Elements. Basic Inspection
    Battery How to Handle Battery How to Handle Battery CAUTION: If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery. After connecting battery cables, ensure that they ...

    Engine Does Not Start When Intelligent Key Is Inside of Vehicle (one Key)
    Diagnosis Procedure Diagnosis Procedure DESCRIPTION Engine does not start when push-button ignition switch is pressed. (One Intelligent Key has the symptom, other keys operate normally.) SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY) ...

    Trunk Lid Opener Actuator
    Component Function Check Component Function Check CHECK FUNCTION CONSULT Select "Trunk/back door" in "Active Test" mode of "BCM(TRUNK)". Select “On” to check tha ...