S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation

Push-Button Ignition Switch

Removal and Installation

Removal and Installation

REMOVAL

Remove shift selector finisher using the following steps:

  • Remove the CVT shift selector knob. Refer to Removal & Installation.

  • Using a suitable tool, release clips and pawls.

    : Pawl

    : Metal clip

  • Disconnect harness connectors and remove the shift selector finisher (1).

  • M/T shift selector knob:

    • Using suitable tool (A), remove shift knob finisher (1).

    • Remove shift knob (1) as shown.

    • Using a suitable tool, release clips of shift selector finisher (1).

      : Metal clip

Remove shift selector finisher.

Using a suitable tool release pawls and remove push-button ignition switch (1) from shift selector finisher (2).

: Pawl
Note:

CVT shown; M/T similar

INSTALLATION

Installation is in the reverse order of removal.

Nats Antenna Amp.

Removal and Installation

Removal and Installation

REMOVAL

The NATS antenna amp. is serviced with the push-button ignition switch. For removal and installation, refer to Removal and Installation.

INSTALLATION

Installation is in the reverse order of removal.

Note:

  • If NATS antenna amp. is not installed correctly, NVIS (NATS) system will not operate properly and "SELF-DIAG RESULTS" on CONSULT screen will show "LOCK MODE" or "CHAIN OF IMMU-KEY".

  • Initialization is not necessary when only the NATS antenna amp. is replaced with a new one.

    Remote Engine Start Function Does Not Operate
    Diagnosis Procedure Diagnosis Procedure DESCRIPTION Engine does not start when push-button ignition switch is pressed while carrying Intelligent Key. Note: Before starting diagn...
    Glass & Window System. Precaution. Precautions
    Precautions Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner" Precaution for Supplemental Restraint System (SRS) "AI...

    Other materials:

    U1231 Amplifier Temperature
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...

    Ambient Sensor Signal Circuit
    Diagnosis Procedure Diagnosis Procedure CHECK AMBIENT SENSOR POWER SUPPLY Ignition switch OFF. Disconnect ambient sensor harness connector. ...

    Primary Pressure Solenoid Valve Circuit
    Diagnosis Procedure Diagnosis Procedure CHECK HARNESS CONNECTOR Ignition switch OFF. Check the mating condition of TCM harness connector and CVT unit harness connector. Is the inspect ...