Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Using a
suitable tool, release pawls and remove the instrument side
finisher LH (1).
:
Pawl
Remove the fuel filler handle assembly. Refer to Exploded View.
Using a
suitable tool, release the instrument lower panel LH clips and
pawls.
: Metal clip
:
Pawl
Disconnect harness connectors and remove the instrument lower panel LH.
INSTALLATION
Installation is in the reverse order of removal.
Other materials:
Driver and front passenger supplemental knee air bags
Driver's side
The supplemental knee air bag in the Nissan Sentra is installed within the knee
bolster on both the driver’s side and the front passenger’s side. All information,
cautions, and warnings provided throughout this Owner’s Manual apply to this system
and must be strict ...
Flywheel
Exploded View
Flywheel
Removal and Installation
REMOVAL
Remove the engine and the transaxle assembly from the vehicle, and
separate the transaxle from the
engine. Refer to TM-28, "Exploded View".
Remove flywheel.
Secure flywheel (1) using Tool (A), and remove b ...
B1430, B1432 Seat belt pre-tensioner LH
Description
DTC B1430, B1432 SEAT BELT PRE-TENSIONER LH
The seat belt pre-tensioner LH is wired to the air bag diagnosis sensor unit.
The air bag diagnosis sensor unit
will monitor for opens and shorts in detected lines to the seat belt pre-tensioner
LH.
PART LOCATION
Refer to SRC-5, " ...
