Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove the wheel and tire using power tool. Refer to Exploded View.
Remove the nut and bolt from the lower ball joint. Disconnect the transverse link from steering knuckle. Refer to Exploded View.
Remove the nuts and bolts and disconnect the transverse link from the suspension member.
Inspect the components. Refer to Inspection.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse the transverse link nuts.
-
Perform the final tightening of the nuts and bolts under unladen conditions with the tires on level ground.
-
Complete the inspection. Refer to Inspection.
Exploded View
Exploded View
Exploded View
1.
Front suspension member
...
Inspection
Inspection
INSPECTION AFTER REMOVAL
Check the following items, and replace the parts
if necessary.
Transverse Link
Check the transverse link for deformation, cracks
or ...
Other materials:
Exploded View
Exploded View
1.
Front grille
2.
Emblem
3.
Front bumper fascia
...
Diagnosis description : counter system
RELATIONSHIP BETWEEN MIL, 1ST TRIP DTC, DTC, AND DETECTABLE ITEMS
When a malfunction is detected for the first time, the 1st trip DTC and
the 1st trip freeze frame data are
stored in the ECM memory.
When the same malfunction is detected in two consecutive trips, the DTC
and the freeze ...
P2138 APP Sensor
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P2138 is displayed with DTC P0643, first perform the trouble
diagnosis for DTC P0643. Refer to
EC-353, "DTC Logic".
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
...
