Diagnosis Procedure
CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL
Ignition switch OFF.
Disconnect rear power window motor LH connector.
Ignition switch ON.
Check voltage between rear power window motor LH harness connector and ground.
|
(+) |
(-) |
Condition |
Voltage (Approx.) |
||
|---|---|---|---|---|---|
|
Rear power window motor LH |
|||||
|
Connector |
Terminal |
||||
|
D204 |
2 |
Ground |
Rear power window switch LH |
NEUTRAL |
0 V |
|
UP |
Battery voltage |
||||
|
1 |
NEUTRAL |
0 V |
|||
|
DOWN |
Battery voltage |
||||
Is the inspection result normal?
YES>>Replace rear power window motor LH. Refer to Removal and Installation.
NO>>GO TO 2.
CHECK REAR POWER WINDOW MOTOR LH CIRCUIT
Ignition switch OFF.
Disconnect rear power window switch LH connector.
Check continuity between rear power window switch LH harness connector and rear power window motor LH harness connector.
|
Rear power window switch LH |
Rear power window motor LH |
Continuity |
||
|---|---|---|---|---|
|
Connector |
Terminal |
Connector |
Terminal |
|
|
D203 |
8 |
D204 |
1 |
Yes |
|
5 |
2 |
|||
Check continuity between rear power window switch LH connector and ground.
|
Rear power window switch LH |
— |
Continuity |
|
|---|---|---|---|
|
Connector |
Terminal |
||
|
D203 |
8 |
Ground |
No |
|
5 |
|||
Is the inspection result normal?
YES >>Check intermittent incident. Refer to Intermittent Incident.
NO >>Repair or replace harness.
Front Rh
Rear RhBluetooth® streaming audio with Navigation System (if so equipped)
If you have a compatible Bluetooth® audio device
that is capable of playing audio files, the
device can be connected to the vehicle’s audio
system so that the audio files on the device play
through the vehicle’s speakers.
Connecting Bluetooth® audio
To connect your Bluetooth® audio ...
Removal and installation
REAR WHEEL HUB
Exploded View - Drum brake
DRUM BRAKE
Rear suspension beam
Brake assembly
Wheel stud
Wheel hub assembly (Bearing-integrated
type)
Brake drum
Removal and Installation - Drum brake
REMOVAL
Remove the wheel and tire using power tool. Refer to WT-47, "Remo ...
Removal and Installation - 60:40 Split Seatback
Removal and Installation - 60:40 Split Seatback
REMOVAL
Place the
rear seatback assembly in the folded down position.
Release the
hook fasteners (A) in the lower corners of the rear seatback
assembly.
Remove the
rear seatback assembly bolts (B) from the seatback hinge bra ...